Have a specific question about your LBP project? Click below and let’s get started.
Dom C. Ouano, Marketing Associate
Debby Renshaw, Shipping Manager
Kim Krause, Laboratory Support Supervisor
Below is a list of recommended steps on handling List Labs products upon receiving them. It should be noted that these are simply our own suggestions. If your institution has a standard protocol in place, we ask that you follow said standard protocol.
As always, use caution, wear the proper personnel protection equipment, and follow safety policies of your institution, and local, state, and federal regulations when handling List Labs products.
These steps can also be found on YouTube.
How to Open the Paint-Can-Style Bottle-In-Can Units from HAZMATPAC:
Some List Labs bacterial toxins are considered Dangerous Goods. These DG’s, as they are called, are packaged with an extra layer of security: HAZMATPAC‘s Bottle-In-Can Unit. This United Nations approved security canister features a patented locking ring for additional closure. Here’s how to open it.
1) Use your hand to grasp the outer edge of the patented locking ring. Pull upwards using light to moderate force. Do not cut the locking ring. There is no need for tools or sharp objects. This step is very easy to perform with your hands.
2) Once the locking ring is removed, we recommend using either a paint can opener or a flat-head screwdriver. To open the canister itself, insert the tip under the outer lip of the lid. Pry upwards using light force.
3) Repeat this prying process clockwise or counterclockwise, according to your comfort, until the lid is fully dislodged from the canister.
4) Dispose of the locking ring and the canister according to appropriate regulations.
More information on these cans can be found at www.HAZMATPAC.com.
How to Open Vials:
1) Use pliers, forceps, hemostat, or an equivalent tool to lift the center tab.
2) Slowly peel back the tab. Gently continue pulling the tab until the crimped metal seal is broken. Remove the metal seal.
3) Use forceps or equivalent tool to slowly and gently lift and remove the rubber cap.
4) Dispose of metal seals, rubber caps, and vials according to appropriate regulations.
We hope that helps. Please refer to our support portal and knowledge base should you need any other technical assistance.